Filter
–
PumpFast – trailer hydraulic pump set for cordless screwdriver operation
Anyone who owns a car trailer with a tipping function has already had to make a decision:
Pay more for an electric pump in the trailer with its own battery or pump manually?
We have put together a new solution for you!
BaSt-Ing offers you a complete set with a robust gear pump,
non-return valve, hydraulic hose and suitable screw connections, so that
you can upgrade your car trailer yourself in just a few minutes. The
pump is designed in such a way that it can be driven with a standard
cordless screwdriver and quickly tilts the trailer, even with a heavy
load.
FAQs:
The tipping time for a 2.7t tipper is approx. 30-40 seconds with a standard cordless screwdriver speed of 1800rpm.
The higher the speed, the faster the tipping process takes place (max. 4000rpm)
Recommended for the PumpFast Set are standard 18V cordless
screwdrivers. With a full weight load, professional cordless
screwdrivers with a torque of approx. 90Nm are required.
The high performance of the cordless screwdriver is only available
when the trailer is loaded to the maximum (weight). If green waste or
firewood is often transported, the devices are subject to low loads.
With a heavy load, the 1st gear of the cordless screwdriver can/should
be used.
The hand pump remains fully functional with the PumpFast system
Several tipping processes can be carried out with a 5Ah battery.
The larger the trailer, the more powerful the hydraulic cylinders
and thus more oil is required per dump. The cordless screwdriver does
not necessarily require higher performance. (System pressure identical
to smaller hangers)
Scope of delivery of the respective variants:Basic – suction on round steel tank:
Suitable for: Chapel pump with round steel tank, oil drain plug below and mounting space for gear pump on the oil drain plug:
Gear pump with construction/design adapted to the application
Glands for metric trailers (not possible with the trailer manufacturer – Eduard)
Flap valve
Adapter – Hex (6.3mm) to 1/2″
Premium – suction on the round steel tank:
Suitable for: Chapel pump with round steel tank, oil drain plug at the bottom, gear pump is mounted separately on the drawbar in a V2A housing:
Stainless steel housing for gear pump with screw connections for mounting on vehicle drawbar
Additional hydraulic fittings and hydraulic hose.
PumpFast – Basic:
Gear pump with construction/design adapted to the application
Glands for metric trailers (note: the trailer manufacturer Eduard
requires additional glands, we offer you a ready-to-use, configured
version for this)
Flap valve
Adapter – Hex (6.3mm) to 1/2″
Premium – suction on the round plastic tank:
Suitable for: Chapel pump with round plastic tank, oil drain screw not available (or in the middle), gear pump is mounted separately on the drawbar in V2A housing:
Brass tank bushing with oil-resistant seals
suitable Forstner bit for drilling the plastic tank
Stainless steel housing for gear pump with screw connections for mounting on vehicle drawbar
Additional hydraulic fittings and hydraulic hose.
PumpFast – Basic:
Gear pump with a design adapted to the application
Fittings for metric tags
Flap valve
Adapter – Hex (6.3mm) to 1/2″
Premium – suction on the square aluminum tank:
Suitable for: O.M.F.B pump with square aluminum/plastic tank, oil drain plug not available (or in the middle), gear pump is mounted separately on the drawbar in a V2A housing:
Aluminium intake pipe for OMFB pump
Stainless steel housing for gear pump with screw connections for mounting on vehicle drawbar
Additional hydraulic fittings and hydraulic hose.
PumpFast – Basic:
Gear pump with a design adapted to the application
Fittings for metric tags
Flap valve
Adapter – Hex (6.3mm) to 1/2″
https://www.youtube.com/watch?v=b7g9rANUscg